Say goodbye to print failures

Super sticky coating designed for PLA and PETG filaments can provide good adhesion to the printer and effectively improve print success rate. No adhesive is required, the bottom of the print is still smooth and stable, and the bottom of the print is reduced when printing large objects.

Eliminating Adhesion Issues

QIDI cool plate is suitable for surfaces with bad shape surface. It can still provide super strong adhesion with a small contact area. It avoids the situation where the prints are scattered all over the floor when removing the printing plate.

How to remove prints from Cool Plate

Use the scrapper included with your printer to gently lift the print, then pry it off carefully. If the print is stuck too tightly, wait for the print plate to cool before removing it. The surface is soft. Be careful when using a scraper to remove printed parts.

About the maintenance of QIDI Cool plate

You can clean the surface with water and detergent if heavy dirt appears. DO NOT use organic solvents (especially acetone) to clean the build plate, as it will damage the surface adhesive layer. The QIDI PLA Silk material exhibits strong adhesion on the QIDI Cool Plate, which may damage printed models. Therefore, we do not recommend using Silk material on the QIDI Cool Plate. For users printing with third-party PLA Silk materials, please select the Generic PLA Silk preset in QIDI Studio and evaluate material compatibility based on the specific conditions.

Product specifications

Item	Specifications
Material	Spring steel plate + low temperature super sticky coating
Color	Blue
Surface temperature resistance	120℃
Thickness	Spring steel plate 0.5mm 2X Coating on each side,Each Coating 0.05mm The top edge of the printing plate may appear thicker due to paint accumulation, which is normal
Printing size	305305mm/245245mm
Packing size	37534515mm/30026515mm
Packing weight	0.5kg/0.35kg

Why Choose This Cool Plate?

Easy Maintenance: QIDI Cool Plate has good adhesion and does not require adhesives or frequent cleaning. In case of severe dirt, the surface can be cleaned with water and detergent.
Good adhesion: After printing, the print can be firmly attached to the plate without parts falling to the ground.
Durable coating: Cool Plate uses a durable coating for long-lasting performance (scratches, dents, and cracks due to printing are normal).
Designed for PLA/PETG: Low-temperature printing is more suitable for PLA and PETG, which saves more power while ensuring good printing results.
Specifications
Spring steel plate: 0.5mm
Coating: 0.05mm spring steel
Net weight: 350g
Surface temperature resistance: 120℃
Use this QIDI Cool Plate - designed to make your every print achieve high-quality results while saving power.

QIDI Build Plate Cleaning Guide

Arrival time
Expected to be in stock in local warehouses in 1-2 months.

If you want to get it before then, you can choose to buy it from China, but you should also handle the customs clearance for shipments from China on your own.

Spring Sale Q1 pro

Qidi filament dryer box

Q1-Pro/X-Max 3/X-Plus 3/X-Smart 3 Hardened steel nozzle (2pcs)

Q1-Pro/X-Max 3/X-Plus 3/X-Smart 3 Brass Nozzle (2pcs)

Q1-Pro/X-Max 3/X-Plus 3/X-Smart 3 Copper plated nozzle (2pcs)

Q1-Pro Dual-sided PEI Plate

Q1-Pro smooth Plate

Q1-Pro/X-Max 3/X-Plus 3 Bimetal Nozzles (2pcs)

Q1-Pro Bimetal hot end

Q1-Pro/X-Max 3/X-Plus 3 Tungsten Carbide Bimetal Nozzles (1pc)

QIDI Cool Plate